iOS Lifestyle Medicine Implementation Guide - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

• Content
• Detailed Descriptions
• Mappings
• XML
• JSON
• TTL

Resource Profile: Advanced Vital Signs Profile

Profile for advanced vital signs data from iOS Health App

Usage:

• This Resource Profile is not used by any profiles in this Implementation Guide

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

• Key Elements Table
• Differential Table
• Snapshot Table
• Statistics/References
• All

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated dom-5: If a resource is contained in another resource, it SHALL NOT have a security label dom-6: A resource should have narrative for robust management obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created ele-1: All FHIR elements must have a @value or children
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
status	?!SΣ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation. ele-1: All FHIR elements must have a @value or children
category	S	1..1	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
code		1..1	code	Symbol in syntax defined by the system Fixed Value: vital-signs
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children
subject	SΣ	1..1	Reference(Patient | Group | Device | Location)	Who and/or what the observation is about ele-1: All FHIR elements must have a @value or children
Slices for effective[x]	Σ	1..1	dateTime	Clinically relevant time/time-period for observation Slice: Unordered, Closed by type:$this ele-1: All FHIR elements must have a @value or children
effective[x]:effectiveDateTime	SΣ	1..1	dateTime	Clinically relevant time/time-period for observation ele-1: All FHIR elements must have a @value or children
note	S	0..*	Annotation	Comments about the observation ele-1: All FHIR elements must have a @value or children
method	S	0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations. ele-1: All FHIR elements must have a @value or children
device	S	0..1	Reference(Device | DeviceMetric)	(Measurement) Device ele-1: All FHIR elements must have a @value or children
Slices for component	Σ	0..*	BackboneElement	Advanced vital signs components Slice: Unordered, Open by pattern:code ele-1: All FHIR elements must have a @value or children
component:All Slices				Content/Rules for all slices
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children
component:hrvSpectral	SΣ	0..1	BackboneElement	Spectral analysis of heart rate variability ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87834-8
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability [Frequency band]
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: ms
component:hrvEntropy	SΣ	0..1	BackboneElement	Sample entropy of heart rate variability ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87835-5
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability entropy
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {entropy}
component:meanArterialPressure	SΣ	0..1	BackboneElement	Mean arterial blood pressure ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 8478-0
display		1..1	string	Representation defined by the system Fixed Value: Mean blood pressure
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: mmHg
component:pulseWaveAnalysis	SΣ	0..1	BackboneElement	Analysis of arterial pulse wave ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87836-3
display		1..1	string	Representation defined by the system Fixed Value: Pulse wave analysis
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {index}
component:respiratoryVariability	SΣ	0..1	BackboneElement	Variability in respiratory rate ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87837-1
display		1..1	string	Representation defined by the system Fixed Value: Respiratory rate variability
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {coefficient}
component:oxygenationIndex	SΣ	0..1	BackboneElement	Index of blood oxygenation ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87838-9
display		1..1	string	Representation defined by the system Fixed Value: Oxygenation index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {ratio}
component:stressIndex	SΣ	0..1	BackboneElement	Index of physiological stress ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87839-7
display		1..1	string	Representation defined by the system Fixed Value: Physiological stress index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {index}
component:thermalGradient	SΣ	0..1	BackboneElement	Gradient of body temperature ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87840-5
display		1..1	string	Representation defined by the system Fixed Value: Temperature gradient
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: Cel
component:autonomicBalance	SΣ	0..1	BackboneElement	Balance of autonomic nervous system ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87841-3
display		1..1	string	Representation defined by the system Fixed Value: Autonomic balance index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {ratio}
component:recoveryRate	SΣ	0..1	BackboneElement	Rate of physiological recovery ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87842-1
display		1..1	string	Representation defined by the system Fixed Value: Recovery rate index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {rate}
component:allostaticLoad	SΣ	0..1	BackboneElement	Measure of cumulative physiological burden ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87843-9
display		1..1	string	Representation defined by the system Fixed Value: Allostatic load index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {score}
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.status	required	ObservationStatus http://hl7.org/fhir/ValueSet/observation-status|4.0.1 from the FHIR Standard
Observation.category	preferred	Pattern: vital-signs http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.method	example	ObservationMethods http://hl7.org/fhir/ValueSet/observation-methods from the FHIR Standard
Observation.component.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvSpectral.code	example	Pattern: LOINC Code 87834-8("Heart rate variability [Frequency band]") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvSpectral.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:hrvEntropy.code	example	Pattern: LOINC Code 87835-5("Heart rate variability entropy") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvEntropy.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:meanArterialPressure.code	example	Pattern: LOINC Code 8478-0("Mean blood pressure") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:meanArterialPressure.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:pulseWaveAnalysis.code	example	Pattern: LOINC Code 87836-3("Pulse wave analysis") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:pulseWaveAnalysis.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:respiratoryVariability.code	example	Pattern: LOINC Code 87837-1("Respiratory rate variability") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:respiratoryVariability.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:oxygenationIndex.code	example	Pattern: LOINC Code 87838-9("Oxygenation index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:oxygenationIndex.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:stressIndex.code	example	Pattern: LOINC Code 87839-7("Physiological stress index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:stressIndex.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:thermalGradient.code	example	Pattern: LOINC Code 87840-5("Temperature gradient") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:thermalGradient.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:autonomicBalance.code	example	Pattern: LOINC Code 87841-3("Autonomic balance index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:autonomicBalance.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:recoveryRate.code	example	Pattern: LOINC Code 87842-1("Recovery rate index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:recoveryRate.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:allostaticLoad.code	example	Pattern: LOINC Code 87843-9("Allostatic load index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:allostaticLoad.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

This structure is derived from Observation

Name	Flags	Card.	Type	Description & Constraints
Observation		0..*	Observation	Measurements and simple assertions
status	S	1..1	code	registered | preliminary | final | amended +
category	S	1..1	CodeableConcept	Classification of type of observation Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
code		1..1	code	Symbol in syntax defined by the system Fixed Value: vital-signs
code	S	1..1	CodeableConcept	Type of observation (code / type)
subject	S	1..1	Reference(Patient | Group | Device | Location)	Who and/or what the observation is about
Slices for effective[x]		1..1	dateTime	Clinically relevant time/time-period for observation Slice: Unordered, Open by type:$this
effective[x]:effectiveDateTime	S	1..1	dateTime	Clinically relevant time/time-period for observation
note	S	0..*	Annotation	Comments about the observation
method	S	0..1	CodeableConcept	How it was done
device	S	0..1	Reference(Device | DeviceMetric)	(Measurement) Device
Slices for component		0..*	BackboneElement	Advanced vital signs components Slice: Unordered, Open by pattern:code
component:hrvSpectral	S	0..1	BackboneElement	Spectral analysis of heart rate variability
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87834-8
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability [Frequency band]
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: ms
component:hrvEntropy	S	0..1	BackboneElement	Sample entropy of heart rate variability
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87835-5
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability entropy
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {entropy}
component:meanArterialPressure	S	0..1	BackboneElement	Mean arterial blood pressure
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 8478-0
display		1..1	string	Representation defined by the system Fixed Value: Mean blood pressure
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: mmHg
component:pulseWaveAnalysis	S	0..1	BackboneElement	Analysis of arterial pulse wave
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87836-3
display		1..1	string	Representation defined by the system Fixed Value: Pulse wave analysis
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {index}
component:respiratoryVariability	S	0..1	BackboneElement	Variability in respiratory rate
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87837-1
display		1..1	string	Representation defined by the system Fixed Value: Respiratory rate variability
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {coefficient}
component:oxygenationIndex	S	0..1	BackboneElement	Index of blood oxygenation
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87838-9
display		1..1	string	Representation defined by the system Fixed Value: Oxygenation index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {ratio}
component:stressIndex	S	0..1	BackboneElement	Index of physiological stress
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87839-7
display		1..1	string	Representation defined by the system Fixed Value: Physiological stress index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {index}
component:thermalGradient	S	0..1	BackboneElement	Gradient of body temperature
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87840-5
display		1..1	string	Representation defined by the system Fixed Value: Temperature gradient
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: Cel
component:autonomicBalance	S	0..1	BackboneElement	Balance of autonomic nervous system
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87841-3
display		1..1	string	Representation defined by the system Fixed Value: Autonomic balance index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {ratio}
component:recoveryRate	S	0..1	BackboneElement	Rate of physiological recovery
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87842-1
display		1..1	string	Representation defined by the system Fixed Value: Recovery rate index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {rate}
component:allostaticLoad	S	0..1	BackboneElement	Measure of cumulative physiological burden
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87843-9
display		1..1	string	Representation defined by the system Fixed Value: Allostatic load index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {score}
Documentation for this format

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
id	Σ	0..1	id	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier	Σ	0..*	Identifier	Business Identifier for observation
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order
partOf	Σ	0..*	Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)	Part of referenced event
status	?!SΣ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation.
category	S	1..1	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: vital-signs
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
subject	SΣ	1..1	Reference(Patient | Group | Device | Location)	Who and/or what the observation is about
focus	Σ	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
Slices for effective[x]	Σ	1..1	dateTime	Clinically relevant time/time-period for observation Slice: Unordered, Closed by type:$this
effective[x]:effectiveDateTime	SΣ	1..1	dateTime	Clinically relevant time/time-period for observation
issued	Σ	0..1	instant	Date/Time this version was made available
performer	Σ	0..*	Reference(Practitioner | PractitionerRole | Organization | CareTeam | Patient | RelatedPerson)	Who is responsible for the observation
value[x]	ΣC	0..1		Actual result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	C	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
note	S	0..*	Annotation	Comments about the observation
bodySite		0..1	CodeableConcept	Observed body part Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.
method	S	0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation
device	S	0..1	Reference(Device | DeviceMetric)	(Measurement) Device
referenceRange	C	0..*	BackboneElement	Provides guide for interpretation obs-3: Must have at least a low or a high or text
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	C	0..1	SimpleQuantity	Low Range, if relevant
high	C	0..1	SimpleQuantity	High Range, if relevant
type		0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant
text		0..1	string	Text based reference range in an observation
hasMember	Σ	0..*	Reference(Observation | QuestionnaireResponse | MolecularSequence)	Related resource that belongs to the Observation group
derivedFrom	Σ	0..*	Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence)	Related measurements the observation is made from
Slices for component	Σ	0..*	BackboneElement	Advanced vital signs components Slice: Unordered, Open by pattern:code
component:All Slices				Content/Rules for all slices
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	Σ	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:hrvSpectral	SΣ	0..1	BackboneElement	Spectral analysis of heart rate variability
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87834-8
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability [Frequency band]
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: ms
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:hrvEntropy	SΣ	0..1	BackboneElement	Sample entropy of heart rate variability
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87835-5
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability entropy
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {entropy}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:meanArterialPressure	SΣ	0..1	BackboneElement	Mean arterial blood pressure
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 8478-0
display		1..1	string	Representation defined by the system Fixed Value: Mean blood pressure
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: mmHg
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:pulseWaveAnalysis	SΣ	0..1	BackboneElement	Analysis of arterial pulse wave
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87836-3
display		1..1	string	Representation defined by the system Fixed Value: Pulse wave analysis
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {index}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:respiratoryVariability	SΣ	0..1	BackboneElement	Variability in respiratory rate
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87837-1
display		1..1	string	Representation defined by the system Fixed Value: Respiratory rate variability
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {coefficient}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:oxygenationIndex	SΣ	0..1	BackboneElement	Index of blood oxygenation
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87838-9
display		1..1	string	Representation defined by the system Fixed Value: Oxygenation index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {ratio}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:stressIndex	SΣ	0..1	BackboneElement	Index of physiological stress
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87839-7
display		1..1	string	Representation defined by the system Fixed Value: Physiological stress index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {index}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:thermalGradient	SΣ	0..1	BackboneElement	Gradient of body temperature
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87840-5
display		1..1	string	Representation defined by the system Fixed Value: Temperature gradient
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: Cel
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:autonomicBalance	SΣ	0..1	BackboneElement	Balance of autonomic nervous system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87841-3
display		1..1	string	Representation defined by the system Fixed Value: Autonomic balance index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {ratio}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:recoveryRate	SΣ	0..1	BackboneElement	Rate of physiological recovery
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87842-1
display		1..1	string	Representation defined by the system Fixed Value: Recovery rate index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {rate}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:allostaticLoad	SΣ	0..1	BackboneElement	Measure of cumulative physiological burden
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87843-9
display		1..1	string	Representation defined by the system Fixed Value: Allostatic load index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {score}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.language	preferred	CommonLanguages http://hl7.org/fhir/ValueSet/languages from the FHIR Standard Additional Bindings Purpose AllLanguages Max Binding
Observation.status	required	ObservationStatus http://hl7.org/fhir/ValueSet/observation-status|4.0.1 from the FHIR Standard
Observation.category	preferred	Pattern: vital-signs http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.bodySite	example	SNOMEDCTBodyStructures http://hl7.org/fhir/ValueSet/body-site from the FHIR Standard
Observation.method	example	ObservationMethods http://hl7.org/fhir/ValueSet/observation-methods from the FHIR Standard
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes http://hl7.org/fhir/ValueSet/referencerange-meaning from the FHIR Standard
Observation.referenceRange.appliesTo	example	ObservationReferenceRangeAppliesToCodes http://hl7.org/fhir/ValueSet/referencerange-appliesto from the FHIR Standard
Observation.component.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:hrvSpectral.code	example	Pattern: LOINC Code 87834-8("Heart rate variability [Frequency band]") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvSpectral.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:hrvSpectral.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:hrvSpectral.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:hrvEntropy.code	example	Pattern: LOINC Code 87835-5("Heart rate variability entropy") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvEntropy.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:hrvEntropy.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:hrvEntropy.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:meanArterialPressure.code	example	Pattern: LOINC Code 8478-0("Mean blood pressure") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:meanArterialPressure.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:meanArterialPressure.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:meanArterialPressure.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:pulseWaveAnalysis.code	example	Pattern: LOINC Code 87836-3("Pulse wave analysis") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:pulseWaveAnalysis.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:pulseWaveAnalysis.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:pulseWaveAnalysis.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:respiratoryVariability.code	example	Pattern: LOINC Code 87837-1("Respiratory rate variability") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:respiratoryVariability.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:respiratoryVariability.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:respiratoryVariability.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:oxygenationIndex.code	example	Pattern: LOINC Code 87838-9("Oxygenation index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:oxygenationIndex.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:oxygenationIndex.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:oxygenationIndex.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:stressIndex.code	example	Pattern: LOINC Code 87839-7("Physiological stress index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:stressIndex.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:stressIndex.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:stressIndex.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:thermalGradient.code	example	Pattern: LOINC Code 87840-5("Temperature gradient") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:thermalGradient.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:thermalGradient.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:thermalGradient.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:autonomicBalance.code	example	Pattern: LOINC Code 87841-3("Autonomic balance index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:autonomicBalance.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:autonomicBalance.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:autonomicBalance.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:recoveryRate.code	example	Pattern: LOINC Code 87842-1("Recovery rate index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:recoveryRate.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:recoveryRate.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:recoveryRate.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:allostaticLoad.code	example	Pattern: LOINC Code 87843-9("Allostatic load index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:allostaticLoad.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:allostaticLoad.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:allostaticLoad.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
obs-3	error	Observation.referenceRange	Must have at least a low or a high or text : low.exists() or high.exists() or text.exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

This structure is derived from Observation

Summary

Mandatory: 4 elements
Must-Support: 19 elements

Slices

This structure defines the following Slices:

• The element 1 is sliced based on the value of Observation.effective[x]
• The element 1 is sliced based on the value of Observation.component
• The element 1 is sliced based on the value of Observation.component.value[x]

Key Elements View

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated dom-5: If a resource is contained in another resource, it SHALL NOT have a security label dom-6: A resource should have narrative for robust management obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created ele-1: All FHIR elements must have a @value or children
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
status	?!SΣ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation. ele-1: All FHIR elements must have a @value or children
category	S	1..1	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
code		1..1	code	Symbol in syntax defined by the system Fixed Value: vital-signs
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children
subject	SΣ	1..1	Reference(Patient | Group | Device | Location)	Who and/or what the observation is about ele-1: All FHIR elements must have a @value or children
Slices for effective[x]	Σ	1..1	dateTime	Clinically relevant time/time-period for observation Slice: Unordered, Closed by type:$this ele-1: All FHIR elements must have a @value or children
effective[x]:effectiveDateTime	SΣ	1..1	dateTime	Clinically relevant time/time-period for observation ele-1: All FHIR elements must have a @value or children
note	S	0..*	Annotation	Comments about the observation ele-1: All FHIR elements must have a @value or children
method	S	0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations. ele-1: All FHIR elements must have a @value or children
device	S	0..1	Reference(Device | DeviceMetric)	(Measurement) Device ele-1: All FHIR elements must have a @value or children
Slices for component	Σ	0..*	BackboneElement	Advanced vital signs components Slice: Unordered, Open by pattern:code ele-1: All FHIR elements must have a @value or children
component:All Slices				Content/Rules for all slices
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children
component:hrvSpectral	SΣ	0..1	BackboneElement	Spectral analysis of heart rate variability ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87834-8
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability [Frequency band]
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: ms
component:hrvEntropy	SΣ	0..1	BackboneElement	Sample entropy of heart rate variability ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87835-5
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability entropy
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {entropy}
component:meanArterialPressure	SΣ	0..1	BackboneElement	Mean arterial blood pressure ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 8478-0
display		1..1	string	Representation defined by the system Fixed Value: Mean blood pressure
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: mmHg
component:pulseWaveAnalysis	SΣ	0..1	BackboneElement	Analysis of arterial pulse wave ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87836-3
display		1..1	string	Representation defined by the system Fixed Value: Pulse wave analysis
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {index}
component:respiratoryVariability	SΣ	0..1	BackboneElement	Variability in respiratory rate ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87837-1
display		1..1	string	Representation defined by the system Fixed Value: Respiratory rate variability
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {coefficient}
component:oxygenationIndex	SΣ	0..1	BackboneElement	Index of blood oxygenation ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87838-9
display		1..1	string	Representation defined by the system Fixed Value: Oxygenation index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {ratio}
component:stressIndex	SΣ	0..1	BackboneElement	Index of physiological stress ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87839-7
display		1..1	string	Representation defined by the system Fixed Value: Physiological stress index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {index}
component:thermalGradient	SΣ	0..1	BackboneElement	Gradient of body temperature ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87840-5
display		1..1	string	Representation defined by the system Fixed Value: Temperature gradient
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: Cel
component:autonomicBalance	SΣ	0..1	BackboneElement	Balance of autonomic nervous system ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87841-3
display		1..1	string	Representation defined by the system Fixed Value: Autonomic balance index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {ratio}
component:recoveryRate	SΣ	0..1	BackboneElement	Rate of physiological recovery ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87842-1
display		1..1	string	Representation defined by the system Fixed Value: Recovery rate index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {rate}
component:allostaticLoad	SΣ	0..1	BackboneElement	Measure of cumulative physiological burden ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87843-9
display		1..1	string	Representation defined by the system Fixed Value: Allostatic load index
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result ele-1: All FHIR elements must have a @value or children
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented. ele-1: All FHIR elements must have a @value or children
system	ΣC	0..1	uri	System that defines coded unit form ele-1: All FHIR elements must have a @value or children Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit ele-1: All FHIR elements must have a @value or children Required Pattern: {score}
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.status	required	ObservationStatus http://hl7.org/fhir/ValueSet/observation-status|4.0.1 from the FHIR Standard
Observation.category	preferred	Pattern: vital-signs http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.method	example	ObservationMethods http://hl7.org/fhir/ValueSet/observation-methods from the FHIR Standard
Observation.component.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvSpectral.code	example	Pattern: LOINC Code 87834-8("Heart rate variability [Frequency band]") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvSpectral.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:hrvEntropy.code	example	Pattern: LOINC Code 87835-5("Heart rate variability entropy") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvEntropy.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:meanArterialPressure.code	example	Pattern: LOINC Code 8478-0("Mean blood pressure") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:meanArterialPressure.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:pulseWaveAnalysis.code	example	Pattern: LOINC Code 87836-3("Pulse wave analysis") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:pulseWaveAnalysis.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:respiratoryVariability.code	example	Pattern: LOINC Code 87837-1("Respiratory rate variability") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:respiratoryVariability.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:oxygenationIndex.code	example	Pattern: LOINC Code 87838-9("Oxygenation index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:oxygenationIndex.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:stressIndex.code	example	Pattern: LOINC Code 87839-7("Physiological stress index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:stressIndex.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:thermalGradient.code	example	Pattern: LOINC Code 87840-5("Temperature gradient") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:thermalGradient.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:autonomicBalance.code	example	Pattern: LOINC Code 87841-3("Autonomic balance index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:autonomicBalance.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:recoveryRate.code	example	Pattern: LOINC Code 87842-1("Recovery rate index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:recoveryRate.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:allostaticLoad.code	example	Pattern: LOINC Code 87843-9("Allostatic load index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:allostaticLoad.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

Differential View

This structure is derived from Observation

Name	Flags	Card.	Type	Description & Constraints
Observation		0..*	Observation	Measurements and simple assertions
status	S	1..1	code	registered | preliminary | final | amended +
category	S	1..1	CodeableConcept	Classification of type of observation Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
code		1..1	code	Symbol in syntax defined by the system Fixed Value: vital-signs
code	S	1..1	CodeableConcept	Type of observation (code / type)
subject	S	1..1	Reference(Patient | Group | Device | Location)	Who and/or what the observation is about
Slices for effective[x]		1..1	dateTime	Clinically relevant time/time-period for observation Slice: Unordered, Open by type:$this
effective[x]:effectiveDateTime	S	1..1	dateTime	Clinically relevant time/time-period for observation
note	S	0..*	Annotation	Comments about the observation
method	S	0..1	CodeableConcept	How it was done
device	S	0..1	Reference(Device | DeviceMetric)	(Measurement) Device
Slices for component		0..*	BackboneElement	Advanced vital signs components Slice: Unordered, Open by pattern:code
component:hrvSpectral	S	0..1	BackboneElement	Spectral analysis of heart rate variability
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87834-8
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability [Frequency band]
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: ms
component:hrvEntropy	S	0..1	BackboneElement	Sample entropy of heart rate variability
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87835-5
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability entropy
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {entropy}
component:meanArterialPressure	S	0..1	BackboneElement	Mean arterial blood pressure
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 8478-0
display		1..1	string	Representation defined by the system Fixed Value: Mean blood pressure
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: mmHg
component:pulseWaveAnalysis	S	0..1	BackboneElement	Analysis of arterial pulse wave
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87836-3
display		1..1	string	Representation defined by the system Fixed Value: Pulse wave analysis
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {index}
component:respiratoryVariability	S	0..1	BackboneElement	Variability in respiratory rate
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87837-1
display		1..1	string	Representation defined by the system Fixed Value: Respiratory rate variability
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {coefficient}
component:oxygenationIndex	S	0..1	BackboneElement	Index of blood oxygenation
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87838-9
display		1..1	string	Representation defined by the system Fixed Value: Oxygenation index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {ratio}
component:stressIndex	S	0..1	BackboneElement	Index of physiological stress
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87839-7
display		1..1	string	Representation defined by the system Fixed Value: Physiological stress index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {index}
component:thermalGradient	S	0..1	BackboneElement	Gradient of body temperature
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87840-5
display		1..1	string	Representation defined by the system Fixed Value: Temperature gradient
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: Cel
component:autonomicBalance	S	0..1	BackboneElement	Balance of autonomic nervous system
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87841-3
display		1..1	string	Representation defined by the system Fixed Value: Autonomic balance index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {ratio}
component:recoveryRate	S	0..1	BackboneElement	Rate of physiological recovery
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87842-1
display		1..1	string	Representation defined by the system Fixed Value: Recovery rate index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {rate}
component:allostaticLoad	S	0..1	BackboneElement	Measure of cumulative physiological burden
code		1..1	CodeableConcept	Type of component observation (code / type) Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87843-9
display		1..1	string	Representation defined by the system Fixed Value: Allostatic load index
Slices for value[x]		0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result Slice: Unordered, Open by type:$this
value[x]:valueQuantity		0..1	Quantity	Actual component result
system		0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code		0..1	code	Coded form of the unit Required Pattern: {score}
Documentation for this format

Snapshot View

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	Observation	Measurements and simple assertions obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
id	Σ	0..1	id	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier	Σ	0..*	Identifier	Business Identifier for observation
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order
partOf	Σ	0..*	Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)	Part of referenced event
status	?!SΣ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation.
category	S	1..1	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: vital-signs
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
subject	SΣ	1..1	Reference(Patient | Group | Device | Location)	Who and/or what the observation is about
focus	Σ	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
Slices for effective[x]	Σ	1..1	dateTime	Clinically relevant time/time-period for observation Slice: Unordered, Closed by type:$this
effective[x]:effectiveDateTime	SΣ	1..1	dateTime	Clinically relevant time/time-period for observation
issued	Σ	0..1	instant	Date/Time this version was made available
performer	Σ	0..*	Reference(Practitioner | PractitionerRole | Organization | CareTeam | Patient | RelatedPerson)	Who is responsible for the observation
value[x]	ΣC	0..1		Actual result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	C	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
note	S	0..*	Annotation	Comments about the observation
bodySite		0..1	CodeableConcept	Observed body part Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.
method	S	0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation
device	S	0..1	Reference(Device | DeviceMetric)	(Measurement) Device
referenceRange	C	0..*	BackboneElement	Provides guide for interpretation obs-3: Must have at least a low or a high or text
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	C	0..1	SimpleQuantity	Low Range, if relevant
high	C	0..1	SimpleQuantity	High Range, if relevant
type		0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant
text		0..1	string	Text based reference range in an observation
hasMember	Σ	0..*	Reference(Observation | QuestionnaireResponse | MolecularSequence)	Related resource that belongs to the Observation group
derivedFrom	Σ	0..*	Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence)	Related measurements the observation is made from
Slices for component	Σ	0..*	BackboneElement	Advanced vital signs components Slice: Unordered, Open by pattern:code
component:All Slices				Content/Rules for all slices
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	Σ	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:hrvSpectral	SΣ	0..1	BackboneElement	Spectral analysis of heart rate variability
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87834-8
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability [Frequency band]
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: ms
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:hrvEntropy	SΣ	0..1	BackboneElement	Sample entropy of heart rate variability
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87835-5
display		1..1	string	Representation defined by the system Fixed Value: Heart rate variability entropy
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {entropy}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:meanArterialPressure	SΣ	0..1	BackboneElement	Mean arterial blood pressure
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 8478-0
display		1..1	string	Representation defined by the system Fixed Value: Mean blood pressure
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: mmHg
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:pulseWaveAnalysis	SΣ	0..1	BackboneElement	Analysis of arterial pulse wave
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87836-3
display		1..1	string	Representation defined by the system Fixed Value: Pulse wave analysis
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {index}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:respiratoryVariability	SΣ	0..1	BackboneElement	Variability in respiratory rate
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87837-1
display		1..1	string	Representation defined by the system Fixed Value: Respiratory rate variability
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {coefficient}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:oxygenationIndex	SΣ	0..1	BackboneElement	Index of blood oxygenation
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87838-9
display		1..1	string	Representation defined by the system Fixed Value: Oxygenation index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {ratio}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:stressIndex	SΣ	0..1	BackboneElement	Index of physiological stress
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87839-7
display		1..1	string	Representation defined by the system Fixed Value: Physiological stress index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {index}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:thermalGradient	SΣ	0..1	BackboneElement	Gradient of body temperature
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87840-5
display		1..1	string	Representation defined by the system Fixed Value: Temperature gradient
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: Cel
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:autonomicBalance	SΣ	0..1	BackboneElement	Balance of autonomic nervous system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87841-3
display		1..1	string	Representation defined by the system Fixed Value: Autonomic balance index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {ratio}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:recoveryRate	SΣ	0..1	BackboneElement	Rate of physiological recovery
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87842-1
display		1..1	string	Representation defined by the system Fixed Value: Recovery rate index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {rate}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:allostaticLoad	SΣ	0..1	BackboneElement	Measure of cumulative physiological burden
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://loinc.org
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 87843-9
display		1..1	string	Representation defined by the system Fixed Value: Allostatic load index
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]	Σ	0..1		Actual component result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueQuantity	Σ	0..1	Quantity	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	0..1	decimal	Numerical value (with implicit precision)
comparator	?!Σ	0..1	code	< | <= | >= | > - how to understand the value Binding: QuantityComparator (required): How the Quantity should be understood and represented.
unit	Σ	0..1	string	Unit representation
system	ΣC	0..1	uri	System that defines coded unit form Required Pattern: http://unitsofmeasure.org
code	Σ	0..1	code	Coded form of the unit Required Pattern: {score}
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.language	preferred	CommonLanguages http://hl7.org/fhir/ValueSet/languages from the FHIR Standard Additional Bindings Purpose AllLanguages Max Binding
Observation.status	required	ObservationStatus http://hl7.org/fhir/ValueSet/observation-status|4.0.1 from the FHIR Standard
Observation.category	preferred	Pattern: vital-signs http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.bodySite	example	SNOMEDCTBodyStructures http://hl7.org/fhir/ValueSet/body-site from the FHIR Standard
Observation.method	example	ObservationMethods http://hl7.org/fhir/ValueSet/observation-methods from the FHIR Standard
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes http://hl7.org/fhir/ValueSet/referencerange-meaning from the FHIR Standard
Observation.referenceRange.appliesTo	example	ObservationReferenceRangeAppliesToCodes http://hl7.org/fhir/ValueSet/referencerange-appliesto from the FHIR Standard
Observation.component.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:hrvSpectral.code	example	Pattern: LOINC Code 87834-8("Heart rate variability [Frequency band]") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvSpectral.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:hrvSpectral.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:hrvSpectral.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:hrvEntropy.code	example	Pattern: LOINC Code 87835-5("Heart rate variability entropy") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:hrvEntropy.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:hrvEntropy.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:hrvEntropy.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:meanArterialPressure.code	example	Pattern: LOINC Code 8478-0("Mean blood pressure") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:meanArterialPressure.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:meanArterialPressure.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:meanArterialPressure.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:pulseWaveAnalysis.code	example	Pattern: LOINC Code 87836-3("Pulse wave analysis") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:pulseWaveAnalysis.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:pulseWaveAnalysis.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:pulseWaveAnalysis.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:respiratoryVariability.code	example	Pattern: LOINC Code 87837-1("Respiratory rate variability") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:respiratoryVariability.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:respiratoryVariability.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:respiratoryVariability.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:oxygenationIndex.code	example	Pattern: LOINC Code 87838-9("Oxygenation index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:oxygenationIndex.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:oxygenationIndex.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:oxygenationIndex.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:stressIndex.code	example	Pattern: LOINC Code 87839-7("Physiological stress index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:stressIndex.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:stressIndex.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:stressIndex.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:thermalGradient.code	example	Pattern: LOINC Code 87840-5("Temperature gradient") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:thermalGradient.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:thermalGradient.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:thermalGradient.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:autonomicBalance.code	example	Pattern: LOINC Code 87841-3("Autonomic balance index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:autonomicBalance.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:autonomicBalance.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:autonomicBalance.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:recoveryRate.code	example	Pattern: LOINC Code 87842-1("Recovery rate index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:recoveryRate.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:recoveryRate.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:recoveryRate.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:allostaticLoad.code	example	Pattern: LOINC Code 87843-9("Allostatic load index") http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:allostaticLoad.value[x]:valueQuantity.comparator	required	QuantityComparator http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 from the FHIR Standard
Observation.component:allostaticLoad.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:allostaticLoad.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
obs-3	error	Observation.referenceRange	Must have at least a low or a high or text : low.exists() or high.exists() or text.exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

This structure is derived from Observation

Summary

Mandatory: 4 elements
Must-Support: 19 elements

Slices

This structure defines the following Slices:

• The element 1 is sliced based on the value of Observation.effective[x]
• The element 1 is sliced based on the value of Observation.component
• The element 1 is sliced based on the value of Observation.component.value[x]